German Steel Helmet

Account limit of 2197 requests per hour exceeded.

Roller skiing

History

First rollerskis were built in the mid 30s in Italy and North Europe.

In the early 1950's, when cross-country skiing started to evolve to a serious competition sport, the necessity for good summer training grew. All around the world from 1950's to 1970's people experimented with skis on wheels.

In the 1970's something of a standard emerged and the first races took place. At this time all rollerskis had one wheel in front and two wheels in the back. The metal frame was between 70 and 100 centimetrs (2'4" and 3'4") long.

Athletes felt they could start to engage themselves in competitions. In 1976, Giustino Del Vecchio, an air pilot, established a record in Monza by doing 240.5 km in 24 hours thanks to the skirolls he had designed, using material and technologies from the aircraft industry; narrow solid wheels with hard tread, reverse lock-up ball bearings to enable push forward.

In the beginning the skis were developed with one wheel in front and two wheels behind.The introduction of skating (free technique) in cross-country skiing implied some changes in the use of materials and training methods, which consequently produced an impact on rollerskis (maybe changes were started by rollerskis, with which skating is much easier). From 3 to 2 wheels, much lighter and easier to use, rollerskis could be used both for the classic style and skating. Paolo Miorin, with his famous Skirollo, can be considered the inventor of the innovative 2-wheels rollerskis.

The Races

The races became international and the need for serious supervising grew. Around 1985 the European Rollerski Federation was established and the first European Championships were organized in the Netherlands in 1988.

The growth of the rollerski sport caused the FIS (Federation Internationale de Ski) to notice the rollerski sport. In 1992 the congress decided to incorporate the rollerski sport. After the first World Games in The Hague, in 1993, the first World Cup races where held in that same year. In 1998, in Prague, the congress decided to grant the rollerski sport the official FIS World Championships. On 30 August- 3 September 2000, these competitions where organized in the Netherlands.

The races are very well differentiated: from only uphill, to flat to undulating tracks. From relays, sprints (typical 200 meters) and team races to individual races and pursuit races. On flat tracks the speed can be as fast as 50 kilometres per hour (30 miles per hour). Average speed on flat tracks in World Cup races can easily be 30 kilometres per hour (almost 20 miles per hour). As in regular cross-country skiing, the rollers compete in classic and free style. Helmets and protective eyeglasses in competitions are mandatory.

World Cup and World Championships

The Italian, Russian, Norwegian, Swedish and German rollers, have been very strong in competitions compared to other Nations since the beginning in 1993.

Men

So far, the World Cup and World Championships, have been dominated by a few very good rollers. The most successful skiroller are Italian Alfio di Gregorio, who has won the World Games three times and World Cup four times. Then include Russian Igor Glushkov who have won World Cup three times. One of the major cross-country skiers has noticed in the sport; It is the Frenchman Vincent Vittoz, which fetched World Championships in 2002. World Championships 2009 takes place in Piglio, Italy.

Women

Mateja Bogatec from Italy has been one of the most successful female rollers since the beginning of the FIS World Cup in 2000.

Equipment

Roller skis for "classic" and "skate" style skiing are used. Also another type of roller ski is added called an off road roller ski. This type of roller ski is designed to take harsher conditions.

For classic style roller skiing the skis usually have wider wheels, and a rachet mechanism on one of the wheels, normally the front. This front wheel only rolls in the forward direction and provides resistance on the "kick"omparable to grip wax on snow.

For skate skiing, the roller skis usually have narrower wheels (similar to those used on inline skates), with both wheels rolling freely.

There are also types of roller skis that have both thin and thick wheels, with a thin one on the tip, a slightly thicker wheel in front of the binding, and two thick wheels at the very back.

Roller skis with pneumatic tires are also available for rough pavement and off-road use.

Normal cross-country ski bindings and ski boots are used with most roller skis. Cross-country ski poles are also used, with the "basket" replaced by a tungsten carbide spike.

Extra protective clothing is recommended (gloves, helmet, knee and elbow pads). Many ski training programs require the use of helmets while roller skiing.

Weltcup in Schmallenberg 2008

Most roller skis don't have bona fide brakes, except for a relatively new calf-activated brake pioneered by Len Johnson of V2 Jenex. Speed reducers, available on some models, work by providing different levels of friction against the wheels. There are also techniques for slowing down without the use of speed reducers. The most common of which is a motion similar to a snowplow on snow skis where pressure is applied to the outside edge of the roller ski and the skis pointed in an inward fashion.

Popular manufacturers of rollerskis are: Pursuit (US), Briko-Maplus (Italy), V2 Jenex (US), Marwe (Finland), Start (Finland), Pro Ski (Norway), SkiSkett (Italy), Eagle Sport (The Netherlands) and Oneway (US).

Roller skiing is most popular in Europe (France, Italy, Norway, Finland, Estonia, Sweden, Russia) where there are many serious races and even a World Cup Circuit. In North America, rollerskiing is popular in areas with many Nordic skiers such as Canmore, Alberta, Alaska, New York, Vermont, New Hampshire, Maine, Minnesota, Wisconsin.

Safety

Roller skiing requires balance, flexibility, upper and lower body strength, good condition of lungs for breathing. Just like other extreme sports you are subject to proper body coordination. Safety equipment should be worn always while roller skiing.

It is recommended to wear reflective clothing and flashing red lights to increase visibility in dark areas. Safety equipment such as a helmet is recommended.

Nordic blading

Nordic blading is a sport which uses ski poles with special tips and inline skates or roller skis to train the total body for skiing. The sport has been practiced for over 80 years by elite cross-country skiers in the off season and is now being redescovered by the masses through blading. It is much like Nordic Ski walking, the only difference being that skates/roller skis are used. The benefits of Nordic blading are similar to that of cross-country skiing if performed correctly. Nordic Blading has also been proven more risky than inline skating as the poles constitute extra coordination challenges. By using the poles, the user can also expect to develop upper and core body strength.

Types of techniques used

one-skate

two-skate

offset

free skate

double poling

diagonal Stride

Double pole-Kick (Step-Double pole)

downhill (tuck, Slalom etc)

Equipment needed

Helmet

Gloves

Poles

Inline skates / Roller skis

Boots (If using actual roller skis)

Resources

Benefits of Roller Skiing

Exel Nordic Blading

Roller Skiing Dryland Training for Nordic Skiing

World Cup results

Medal takers in the World Cup and World Games

See also

Nordic walking

Notes

^ http://www.skiroll.it/storia/storia_english.htm

Categories: Cross-country skiing | Types of skiing
About the Author

I am an expert from China Quality Lighting, usually analyzes all kind of industries situation, such as 3m grinding , steel abrasives.

NORMANDY RELIC WW2 GERMAN MODEL 1935 STEEL HELMET